CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
CAUTION: Be careful not to damage the edges of the sleeve grooves and outer surface when removing the seal rings.
29. Using a cutter or an equivalent tool, cut the valve seal ring and O-ring at the groove the pinion shaft. Remove the valve seal ring and O-ring.
CAUTION: Be careful not to damage the edges of the pinion shaft groove and outer surface when removing the valve seal ring and O-ring.
30. Remove the valve oil seal and backup ring from the pinion shaft.
NOTE: Inspect the ball bearing by rotating the outer race slowly. If there is any excessive play, replace the pinion shaft and sleeve as an
assembly. The pinion shaft and sleeve are a precise fit; do not intermix old and new pinion shafts and sleeves.
31. Press the valve oil seal and roller bearing out of the valve housing using a hydraulic press and special tool shown below.
