CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Wheel Bearing: Service and Repair
Front
TOOL REQUIRED
-
07GAF-SE00100 Hub Dis/Assembly Tool
-
07GAF-SD40700 Hub Dis/Assembly Base
-
07749-0010000 Driver
-
07746-0010400 52 x 55 mm Attachment
NOTE:
-
Use only genuine Acura wheel weights for aluminum wheels. Non-genuine wheel weights may corrode and damage the aluminum wheels.
-
For aluminum wheels, remove the center cap by prying it out with a flat screwdriver. Use a rag at the point you are going to pry because aluminum
alloy wheels can be easily damaged. Avoid damage to the cap by not allowing it to fall during removal.
-
Before installing the brake disc, clean the mating surfaces of the rear hub and brake disc.
-
Before installing the wheel, clean the mating surfaces of the brake disc and wheel.
REPLACEMENT
1. Remove steering knuckle. See: Steering/Front Steering Knuckle/Service and Repair
2. Remove the knuckle from the hub unit.
3. Remove the splash guard from the knuckle.
NOTE: It is not necessary to remove the splash guard for hub unit or wheel bearing replacement.
