CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
4. Remove the four flange bolts, then separate the hub unit from the brake disc.
5. Separate the wheel bearing from the front hub using the special tools and a press as shown.
CAUTION: Hold onto the hub to keep it from falling when pressed clear.
6. Press the wheel bearing inner race from the hub using the special tools and a bearing separator as shown.
7. Replace the bearing with a new one after removal.
NOTE: Wash the knuckle and hub thoroughly in high flash point solvent before reassembly.
