CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
REMOVAL
1. Using a hydraulic press, press the countershaft out from the 1st/3rd gear assembly while supporting the 1st-hold clutch.
NOTE:
-
Place an attachment between the press and countershaft to prevent damage to the shaft.
-
Hold onto the countershaft to keep it from falling when pressed clear.
INSTALLATION
NOTE: Lubricate all parts with ATF during assembly.
1. Install the one-way clutch securely in the 1st gear in the direction shown, and install the thrust needle bearing in the 1st gear.
2. Assemble the 3rd gear and 1st gear by turning the 3rd gear in the direction shown.
