CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
NOTE: Always rotate the circlip in its groove to be sure it is fully seated.
7. Fit the rollers to the spider with their high shoulders facing outward.
NOTE:
-
Reinstall the rollers in their original positions on the spider by aligning the marks.
-
Hold the driveshaft pointed up to prevent the rollers from falling off.
8. Pack the inboard joint with the joint grease included in the new driveshaft set.
-
Grease quantity: 120 - 130 g (4.2 - 4.6 oz).
9. Fit the inboard joint onto the driveshaft.
NOTE:
-
Reinstall the inboard joint onto the driveshaft by aligning the marks on the inboard joint with the marks on the rollers.
-
Hold the driveshaft so the inboard joint points up to prevent it from falling off.
