CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Countershaft: Testing and Inspection
CLEARANCE INSPECTION
1. Measure the clearance between 1st gear and the thrust washer.
-
Standard: 0.06 - 0.23 mm (0.002 - 0.009 inch)
-
Service Limit: 0.23 mm (0.009 inch)
2. If the clearance exceeds the service limit, measure the thicknesses of 1st gear and the thrust washer.
-
1ST GEAR
-
Standard: 32.95 - 33.00 mm (1.297 - 1.299 inch)
-
THRUST WASHER
-
Standard: 1.95 - 1.97 mm (0.077 - 0.078 inch)
-
If the thicknesses of 1st gear and the thrust washer are less than the standard, replace them with new ones. If the thicknesses of 1st gear and the
thrust washer are within the standard, replace the 1st/2nd synchro hub with a new one.
3. Measure the clearance between 2nd gear and 3rd gear.
-
Standard: 0.10 - 0.15 mm (0.004 - 0.006 inch)
-
Service Limit: 0.18 mm (0.007 inch)
