CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
5. If the clearance is more than the service limit, measure distance (A) on the spacer collar.
-
Standard: 26.03 - 26.08 mm (1.025 - 1.027 inch)
-
Service Limit: 26.01 mm (1.024 inch)
6. If distance (A) is less than the service limit, replace the spacer collar with a new one.
If distance (A) is within the service limit, measure the thickness of 4th gear.
-
If the thickness of 4th gear is less than the service limit, replace 4th gear with a new one.
-
If the thickness of 4th gear is within the service limit, replace the 3rd/4th synchro hub with a new one
7. Measure the clearance between the spacer collar and 5th gear.
-
Standard: 0.06 - 0.21 mm (0.002 - 0.008 inch)
8. If the clearance is more than the service limit, mea sure distance (B) on the spacer collar.
-
Standard: 26.03 - 26.08 mm (1.025 - 1.027 inch)
-
Service Limit: 26.01 mm (1.024 inch)
