CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Mainshaft: Adjustments
THRUST CLEARANCE
1. Remove the 78 mm shim and oil guide plate from the transmission housing.
2. Install the 3rd/4th synchro hub, spacer collar, 5th synchro hub, spacer, and ball bearing on the mainshaft, then install the above assembly in the
transmission housing.
3. Install the washer on the mainshaft.
4. Measure distance (B) between the end of the transmission housing and washer.
NOTE:
-
Use a straight edge and vernier caliper.
-
Measure at three locations and average the reading.
5. Measure distance (C) between the end of the clutch housing and bearing inner race.
NOTE:
