CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
-
Use a straight edge and depth gauge.
-
Measure at three locations and average the readings.
6. Select the proper 78 mm shim from the chart by using the formula below.
-
Shim Selection Formula: From the measurements you made in steps 4 and 5:
a. Add distance (C) (step 5) to distance (B) (step 4).
b. From this number, subtract 0.93 (which is the midpoint of the flex range of the clutch housing bearing spring washer).
c. Take this number and compare it to the available shim sizes in the chart. (For example) B: 2.39 + C: 0.22 = 2.61 - 0.93 = 1.68
Try the 1.68 mm (0.0661 inch) shim.
7. Check the thrust clearance in the manner described below.
NOTE: Measurement should be made at normal room temperature.
