CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Shift Fork: Specifications
DIMENSIONS
Clearances Between The Reverse Shift Fork And 5th/reverse Shift Piece Pin:
Standard:
A .................................................................................................................................................................... 0.05 - 0.35 mm (0.002 - 0.014 inch)
B ............................................................................................................................................................................ 0.4 - 0.8 mm (0.02 - 0.03 inch)
Service Limit:
A .............................................................................................................................................................................................. 0.5 mm (0.02 inch)
B .............................................................................................................................................................................................. 1.0 mm (0.04 inch)
Widths Of The Groove In The Reverse Shift Fork:
Standard:
A .................................................................................................................................................................... 7.05 - 7.25 mm (0.278 - 0.285 inch)
B ............................................................................................................................................................................ 7.4 - 7.7 mm (0.29 - 0.30 inch)
Clearance Between The Reverse Idler Gear And Reverse Shift Fork:
Standard ...................................................................................................................................................................... 0.5 - 1.1 mm (0.02 - 0.04 inch)
Service Limit ................................................................................................................................................................................. 1.8 mm (0.07 inch)
Width Of The Reverse Shift Fork:
Standard .............................................................................................................................................................. 13.0 - 13.3 mm (0.512 - 0.524 inch)
Clearance Between Each Shift Fork And Its Matching Synchro Sleeve:
Standard .............................................................................................................................................................. 0.35 - 0.65 mm (0.014 - 0.026 inch)
Service Limit ............................................................................................................................................................................. 1.00 mm (0.039 inch)
Clearance Between The Shift Fork And The Shift Arm:
Standard .................................................................................................................................................................. 0.2 - 0.5 mm (0.008 - 0.020 inch)
Service Limit ............................................................................................................................................................................... 0.6 mm (0.024 inch)
Width Of The Shift Arm:
Standard .............................................................................................................................................................. 12.9 - 13.0 mm (0.508 - 0.512 inch)
