CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Shift Fork: Testing and Inspection
Reverse Shift Fork
CLEARANCE INSPECTION
1. Measure the clearances between the reverse shift fork and 5th/reverse shift piece pin.
-
Standard:
-
A: 0.05 - 0.35 mm (0.002 - 0.014 inch)
-
B: 0.4 - 0.8 mm (0.02 - 0.03 inch)
-
Service Limit:
-
A: 0.5 mm (0.02 inch)
-
B: 1.0 mm (0.04 inch)
2. If the clearances are more than the service limit, measure the widths of the groove in the reverse shift fork.
-
Standard:
-
A: 7.05 - 7.25 mm (0.278 - 0.285 inch)
-
B: 7.4 - 7.7 mm (0.29 - 0.30 inch)
-
If the widths of the grooves are not within the standard, replace the reverse shift fork with a new one.
-
If the widths of the grooves are within the standard, replace the 5th/reverse shift piece with a new one.
3. Measure the clearance between the reverse idler gear and reverse shift fork.
-
Standard: 0.5 - 1.1 mm (0.02 - 0.04 inch)
-
Service Limit: 1.8 mm (0.07 inch)
