CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-4558001.png)
Power Door Lock Actuator: Testing and Inspection
Passenger's Door Lock Actuator Test
1. Remove the door panel.
2. Disconnect the 4P connector from the actuator.
3. Check actuator operation by connecting power and ground according to the table.
CAUTION: To prevent damage to the actuator, apply battery voltage only momentarily.
4. If the actuator fails to work properly, replace it.
5. Check for continuity between the terminals in each switch position according to the table.
