CL V6-3.0L SOHC (VTEC) (1999)
-
The difference between measurements on each journal must not be more than the service limit.
Journal Taper:
Standard (New): 0.005 mm (0.0002 inch)maximum
Service Limit: 0.010 mm (0.0004 inch)
-
The difference between measurements on each journal must not be more than the service limit.
Journal Taper:
Standard (New): 0.005 mm (0.0002 inch)maximum
Service Limit: 0.010 mm (0.0004 inch)