CL V6-3.0L SOHC (VTEC) (1999)
4) Water pump pulley
5) Front camshaft pulley
6) Idler pulley.
NOTE: Make sure the timing belt drive pulley and camshaft pulleys are at TDC.
Idler Pulley
11. Tighten the idler pulley bolt.
Belt Stopper
12. Remove the stopper.
13. Install the lower cover and upper covers.
14. Install the crankshaft pulley, then tighten the pulley bolt.
15. Rotate the crankshaft pulley about five or six turns clockwise so the timing belt positions on the pulleys.