CL V6-3.0L SOHC (VTEC) (1999)
Steering Gear: Service and Repair
Installation
CAUTION: Be careful not to bend or damage the two power steering lines and cylinder lines when installing the gearbox.
1. Before installing the gearbox, slide the rack all the way to right.
2. Install the pinion shaft grommet.
NOTE: Align the slot in the pinion shaft grommet with the lug portion on the valve housing.
3. Pass the right side of the steering gearbox above and through the right side of the rear beam.
4. Raise the left side of the steering gearbox above and through the left side of the rear beam.
5. Install the pinion shaft grommet, then insert the pinion shaft up through the bulkhead.
6. Install the mounting cushion.