CL V6-3.0L SOHC (VTEC) (1999)
NOTE: Position the split portion of the mounting cushion as shown.
7. Install the right mounting bracket over the mounting cushion, then loosely install two gearbox mounting baits.
8. Tighten the four mounting bolts on the stiffener plate first, then tighten the two mounting bolts on the right mounting brackets.
NOTE: After installing the steering gearbox, make sure that there is no interference between the cylinder lines and rear beam.
9. Center the steering rack in the middle of its stroke, then install the steering joint, and reconnect the steering shaft and pinion shaft.