CL TYPE S V6-3.2L SOHC (2001)
8. Remove the hole seal (A), and remove the bolts securing the outer handle protector (B) and outer handle (C).
9. Remove the outer handle protector (A) from the outer handle (B) by releasing the hook (C).
10. Pull out the outer handle (A). Pry the outer handle rod (B) out of its joint (C) using diagonal cutters (D).
NOTE:
-
To ease reassembly, note the distance (E) of the outer handle rod on the joint before disconnecting it.
-
Take care not to bend the outer handle rod.
-
Use a shop towel (F) to protect the opening in the door.
11. Replace the bushing (G) on the outer handle.
