CL TYPE S V6-3.2L SOHC (2001)
12. Install the handle in the reverse order of removal, and note these items:
-
Make sure the cylinder switch harness is routed properly.
-
Make sure the connector is plugged in properly, and each rod is connected securely.
-
Make sure the door locks and opens properly.
-
When installing the lock cylinder, leave the outer door handle bolts loose so the inner protector does not interfere with the lock cylinder.
-
Install the lock cylinder retaining clip (A) on the handle (B), then install the lock cylinder (C). Be sure the clip is fully seated in the slot on the
lock cylinder.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its perimeter.
