CL TYPE S V6-3.2L SOHC (2001)
4. Apply multipurpose grease to all the sliding surfaces of the regulator (A) where shown.
5. Install in the reverse order of removal, and note these items:
-
Make sure the connector is plugged in properly.
-
Raise and lower the glass to see if it moves freely without binding.
-
Make sure that there is no clearance between the glass and glass run channel when the glass is closed.
-
Adjust the position of the glass as necessary.
-
Check for water leaks.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its perimeter.