CL TYPE S V6-3.2L SOHC (2001)
Seat Cover: Service and Repair
Rear Seat Cushion Cover
Rear Seat Cushion Cover Replacement
NOTE: The left seat cushion is shown, the right seat cushion is symmetrical.
1. Remove the seat cushion.
2. Release all the clips (A) from under the seat cushion, and fold back the seat cushion cover (B).
3. Pull back the edge of the seat cushion cover (A) all the way around, and release the clips (B) and fasteners (C), then remove the seat cushion
cover.
4. Install the seat cushion cover in the reverse order of removal, and note these items:
-
To prevent wrinkles, make sure the material is stretched evenly over the pad before securing the fasteners and clips.
-
Replace any clips (A) you removed with new ones. Install them with commercially available upholstery ring pliers (B).
