CL TYPE S V6-3.2L SOHC (2001)
6. Release the hook strips (A) and hooks (B), then loosen the seat-back cover (C).
7. Release all inside springs (D) of the seat-back cover and hooks (E) of the reinforcing cloth (F).
8. Pull out the headrest guides (G) while pinching the end of the guides, and remove them.
9. Pull back the edge of the seat-back cover all the way around. Release the clips (H) and fasteners (I) from under the seat-back cover, then remove
the seat-back cover.
10. Install the seat-back cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks,
springs, clips, and fasteners.
-
Replace the released clips you removed with new ones. Install them with commercially available upholstery ring pliers.
-
Use only genuine Honda replacement seat-back covers.
Seat Cushion Cover
1. Remove the front seat.
2. Remove the seat cushion, 4-way power seat, 8-way power seat.
3. Remove the front cover from the seat cushion, 4-way power seat, 8-way power seat.
4. Release the clips (A) and hooks (B) from under the seat cushion, then loosen the seat cushion cover (C).
