CL TYPE S V6-3.2L SOHC (2001)
Remove the tool bed from the brake lathe, then mount the brake lathe to the steering knuckle with an Acura 1-piece speed mount. These mounts provide
quicker, more accurate mounting, and can be ordered through the Acura Tool and Equipment Program (see ORDERING INFORMATION).
Acura 1-Piece Speed Mounts
^
P/N KWY-108006000 (For most models)
^
P/N KWY-108007500 (MDX with two-piston calipers)
^
P/N KWY-108009000 (TL with Brembo brakes)
^
P/N KWY-108009500 (2005-07 RL)
Attaching the Power Drive System
1. Make sure the drive motor assembly on the power drive system is level with the brake disc.
