CL TYPE S V6-3.2L SOHC (2001)
Vacuum Brake Booster: Service and Repair
Brake Booster Replacement
1. Remove the master cylinder.
2. Disconnect the vacuum hose (A) from the brake booster (B).
3. Remove the fuel feed line bracket (C).
4. Remove the starter cable clamps (D).
5. Remove the windshield wiper intermittent relay bracket (E).
6. Remove the lock pin (A) and clevis pin (B).
7. Remove the four booster mounting nuts (C).
8. Pull the brake booster (A) forward, then turn it to the right until the clevis (B) is clear of the bulkhead at the cutout (C).
9. Install the brake booster in the reverse order of removal, and note these items:
-
Adjust the pushrod length before installing the brake booster.
-
Use a new lock pin.
-
After installation, adjust the brake pedal height and brake pedal free play.