CL TYPE S V6-3.2L SOHC (2001)
27. Measure the voltage between the No.1 terminal of the fan control relay 5P socket and body ground.
Is there battery voltage?
YES - Go to step 28.
NO - Repair open in the wire between the condenser fan and the fan control relay.
28. Turn the A/C and fan switches OFF, then turn the ignition switch OFF.
29. Disconnect the radiator fan 2P connector.
30. Check for continuity between the No.4 terminal of the fan control relay 5P socket and the No.2 terminal of the radiator fan 2P connector.
Is there continuity?
YES - Go to step 31.
NO - Repair open in the wire between the fan control relay and the radiator fan.
31. Check for continuity between the No.1 terminal of the radiator fan 2P connector and body ground.
Is there continuity?
YES - Replace the radiator fan motor.
NO - Check for an open in the wire between the radiator fan and body ground. If the wire is OK, check for poor ground at G201.
