CL TYPE S V6-3.2L SOHC (2001)
9. Remove the mounting bolts and the heater unit.
10. Remove the self-tapping screws, the mode control motor (A), and the linkage (B). Remove the self-tapping screws and the brackets (C). Remove
the self-tapping screws, then carefully separate the upper housing (D) from the lower housing (E). Be careful not to bend the inlet and outlet pipes
when removing the heater core (F).
11. Install the heater core in the reverse order of removal.
12. Install the heater unit in the reverse order of removal, and note these items:
-
Do not interchange the inlet and outlet heater hoses.
-
Install the hose clamps securely.
-
Refill the cooling system with engine coolant.
-
Adjust the heater valve cable.
-
Make sure there is no coolant leakage.
-
Make sure there is no air leakage.
-
Enter the anti-theft code for the radio and the navigation system, then enter the customer's radio station presets.
-
For '03 models: Perform the engine control module (ECM)/powertrain control module (PCM) idle learn procedure, and the power window
control unit reset procedure.
