CL TYPE S V6-3.2L SOHC (2001)
Is there battery voltage?
YES - Go to step 4.
NO - Repair open in the wire between DLC terminal No.13 and the ECM (A25, A26).
4. Turn the ignition switch ON (II).
5. Measure voltage between DLC terminals No.13 and No.15.
Is there 8.5 V or more?
YES - Go to step 10.
NO - Go to step 6.
6. Turn the ignition switch OFF.
7. Disconnect ECM connector E (31P). Make sure the OBD II scan tool or Honda PGM Tester is disconnected from the DLC.
8. Check for continuity between DLC terminal No.15 and body ground.
Is there continuity?
YES - Repair short to ground in the wire between DLC terminal No.15 and the ECM (E27). After repairing the wire, check the DTC with the
OBD II scan tool/Honda PGM Tester, then go to the DTC Troubleshooting Index.
NO - Go to step 9.
