CL TYPE S V6-3.2L SOHC (2001)
Air Bag: Service and Repair
Driver Side
Driver's Air-bag Replacement
Removal
1. Disconnect the battery negative cable, and wait at least 3 minutes before beginning work.
2. Remove the access panel (A) from the steering wheel, then disconnect the connector between the cable reel 2P ('01-02 models) or 4P ('03 model)
connector (B) and driver's airbag 2P ('01-02 models) or 4P ('03 model) connector (C).
3. Remove the covers (A, B) from the steering wheel, then remove the two Torx bolts (C) using a Torx T30 bit. Remove the driver's airbag (D).
4. Disconnect the horn connector from the steering wheel.
Installation