CL TYPE S V6-3.2L SOHC (2001)
Seat Belt: Service and Repair
Rear Seat Belt Replacement
Rear Seat Belt Replacement
NOTE: Check the rear seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.
1. Slide the front seat forward fully. Then remove the C-pillar trim and rear side trim panel.
2. Remove the lower anchor bolt (A). Then route the lower anchor (B) through the hole (C) in the C-pillar. trim (D).
3. Remove the upper anchor bolt (E) and retractor bolt (F). Remove the rear seat belt (G) and retractor (H).
4. Install the rear seat belt and retractor in the reverse order of removal, and note these items:
-
Check that the retractor locking mechanism functions as described.
-
Assemble the washers, collar and bushing on the upper anchor bolt as described.
-
Apply liquid thread lock to the upper anchor bolt before reinstallation.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the seat belt.
