CL TYPE S V6-3.2L SOHC (2001)
Seat Belt Buckle: Service and Repair
Front Seat Belt Buckles
Front Seat Belt Replacement
SRS components are located in this area. Review the SRS component locations, and precations and procedures in the SRS section before preforming
repairs or service.
NOTE: Check the front seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.
Front Seat Belt Buckle Replacement
NOTE: Check the front seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.
On the 8-way power seat or the 4-way power seat, raise the seat cushion to its maximum height.
Remove the front seat. Then remove the center cover from the front seat, 4-way power seat, 8-way power seat.
Remove the front seat belt buckle as shown.
Install the buckle in the reverse order of removal. Assemble the washers and collar on the center anchor bolt as described.
NOTE: Verify wire harness routing; Operate the seat (back and forth, up and down), check that the seat functions do not pull or pinch the seat belt
buckle wire harness.
Front Seat Belt Upper Anchor Bolt
