CL TYPE S V6-3.2L SOHC (2001)
6. Disconnect the 2P connector between the side airbag (A) and the side wire harness (B).
Seat belt tensioner:
7. Disconnect the 2P connector between the seat belt tensioner (A) and side wire harness (B).
8. Pull the seat belt out all the way and cut it.
9. Cut off each connector, strip the ends of the wires, and connect the deployment tool alligator clips (A) to the wires. Place the deployment tool at
least 30 feet (10 meters) away from the vehicle.
NOTE: The driver's airbag ('03 model) and front passenger's airbag have four wires, two yellow and two red. Twist each pair of unlike colored
wires together, and connect an alligator clip to each pair.
