CL TYPE S V6-3.2L SOHC (2001)
YES - Go to step 6.
NO - Repair open in the BLU/BLK wire.
6. Reconnect the 3P connector and the 20P connector.
7. Check for voltage between the No. 1 terminal of the slide position sensor and body ground when the slide switch moves forward or backward.
Does voltage pulse from 0 to about 5 V alternately?
YES - Replace the power seat control unit.
NO - Check for a short in the wire. If the wire is OK, faulty slide position sensor; replace the slide motor assembly.