CL TYPE S V6-3.2L SOHC (2001)
21. Set the pump cam ring (A) over the two pins with its "^" mark (B) facing downward.
22. Install the pump rotor (A) into the pump cover (B) with its "^" mark (C) facing downward.
23. Set the 10 vanes (D) in the grooves in the rotor. Make sure that the round ends (E) of the vanes are in contact with the sliding surface of the cam
ring.
24. Coat the new O-ring (A) with power steering fluid, and install it into the Groove in the side plate (B).
25. Install the side plate on the cam ring (C) by aligning the holes (D) in the side plate with the pins (E).
