CL TYPE S V6-3.2L SOHC (2001)
75. Install the stop washer (A), and screw each rack end (B) into the rack while holding the lock washer (C) so its tabs (D) are in the slots (E) in the
end of the rack.
76. Hold the flat surface sections of the right side steering rack with a wrench, and tighten the both rack ends. Be careful not to damage the rack
surface with the wrench.
77. Bend the lock washer back against the flat spots on the rack end joint housing.
78. Apply multipurpose grease to the circumference of the rack end joint housing (A).
79. Apply a light coat of silicone grease to the boot grooves (B) on the rack end.
