CL TYPE S V6-3.2L SOHC (2001)
4. Remove the intermediate shaft (A) from the differential. Hold the intermediate shaft horizontal until it is clear of the differential to prevent damage
to the differential oil seal (B).
Disassembly
Special Tools Required
-
Driver 07749-0010000
-
Driver attachment 07947-6340500
-
Support base attachment 07LAF-SM40300
-
Support base 07965-SD90100
-
Attachment, 42 x 47 mm 07746-0010300
1. Remove the heat shield (A) and intermediate shaft outer seal (B) from the bearing support (C).
2. Remove the external snap ring (D).