CL TYPE S V6-3.2L SOHC (2001)
Transmission Position Switch/Sensor: Service and Repair
Transmission Range Switch Replacement
1. Raise the front of the vehicle, and make sure it is securely supported.
2. Set the parking brake, and block both rear wheels securely.
3. Shift to the N position.
4. Remove the transmission range switch connector (A) from the connector bracket (B), then disconnect the connector.
5. Remove the clamp from the harness clamp bracket on the transmission housing, and remove the harness clamp (A) from the end cover (B).
6. Remove the transmission range switch cover (C), then remove the transmission range switch (D) from the end cover.
7. Set the transmission range switch to the N position.
NOTE: The transmission range switch clicks in the N position.
