CL TYPE S V6-3.2L SOHC (2001)
11. With a sponge, apply a light coat of body primer to the original adhesive remaining around the quarter glass opening flange. Let the body primer
dry for at least 10 minutes:
-
Do not apply glass primer to the body, and do not get glass and body primer sponges mixed up.
-
Never touch the primed surfaces with your hands.
-
Mask off the dashboard before painting the flange.
12. Before filling a cartridge, cut a "V" in the end of the nozzle (A) as shown.
13. Pack adhesive into the cartridge without air pockets to ensure continuous delivery. Put the cartridge in a caulking gun, and run a bead of adhesive
(A) around the edge of the quarter glass (B) as shown:
-
After applying the adhesive, peel the separator off the butyl tape.
-
Apply the adhesive within 30 minutes after applying the glass primer. Make a slightly thicker bead at each corner.