Integra L4-1590cc 1.6L DOHC FI (1987)
Fig. 21 Aligning instrument panel bracket to allow component removal. Integra
6.
Remove bolts securing instrument panel lower bracket to bracket B, Fig. 21, then pry instrument panel bracket forward approximately 1/2 inch to
provide clearance.
7.
Loosen sealing band on right side of housing and disconnect electrical connector from blower motor.
Fig. 20 Blower housing installation. Integra with A/C, models less A/C similar
8.
Remove three bolts securing blower housing and the housing, Fig. 20.
Fig. 19 Exploded view of blower housing assembly. Integra