Integra L4-1590cc 1.6L DOHC FI (1987)
Turn Signal Switch: Service and Repair
1.
Disconnect battery ground cable.
2.
Remove steering wheel.
3.
Remove steering wheel lower cover.
4.
On models equipped with cruise control, remove cruise control slip ring.
5.
On all models, remove turn signal cancelling sleeve.
6.
Remove upper column holder, bending plate, bending plate base and bending plate guide.
7.
Disconnect combination switch electrical connector.
8.
Remove combination switch attaching screws and the switch.
9.
Reverse procedure to install.
