Integra L4-1590cc 1.6L DOHC FI (1987)
5. Align hole in flywheel with crankshaft dowel pin and install flywheel, then install attaching bolts finger tight.
6. Install the special tool, then torque the flywheel mounting bolts in a crisscross pattern in several steps as shown.
Installation
NOTE: Use only Super High Temp Urea Grease (P/N 08798-9002).
1. Install the ring gear holder.
2. Apply grease to the splines of the clutch disc, and install the clutch disc using the special tools as shown.
3. Install the release bearing on the pressure plate.
4. Install the pressure plate.