acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Wheel Bearing > < All Other Service Bulletins for Constant Velocity Joint Boot:|89001
Page 2
background image

2.

Lie in the cargo area and have an assistant close the tailgate. Check the position of the striker loop in the latch mechanism. If it is not centered,
adjust the latch. If the range of latch adjustment is ncit sufficient, the striker loop may also be loosened and adjusted. After completing the
adjustment, apply a small dab of multipurpose grease to the striker loop as shown in step 1.

3.

Push the rubber pad on each tailgate side cushion downward and apply a coating of multipurpose grease to the plate. Do not apply any grease to
the part of the cushion that contacts the tailgate.

4.

Check the adjustment of the tailgate stoppers by placing a piece of paper between each stopper and the body and fully closing the tailgate. You
should not be able to remove the paper without tearing it. If this is not the case, adjust the stopper.

PARTS INFORMATION

None

WARRANTY INFORMATION

Operation Number:

839020

Flat Rate Time:

0.4 hour

Failed Part No.:

83309-SB2-661ZL

Defect Code:

043

Contention Code:

B07

Wheel Bearing > < All Other Service Bulletins for Constant Velocity Joint Boot:|89001