Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
_fi/Page-2304003.png)
Fig. 8 Brake Spring Removal
Fig. 9 Brake Spring Removal
Fig. 10 Brake Spring Removal
10.
Position brake spring compressor tool between caliper body and spring cover, Figs. 8 through 10.
11.
Turn shaft of tool to compress adjusting spring, then remove circlip or retaining ring.
12.
On Integra models, remove spring cover, adjusting spring, spacer, bearing, adjusting bolt, sleeve piston and rod.
13.
On 1989-90 Legend models, remove spring compressor, then the spring cover, spring, seat, retaining ring, key plate, pushrod and rod from
caliper. Remove O-ring from pushrod.
14.
On all models, remove return spring, parking nut, spring washer, lever, cam and cam boot.
Assembly & Installation
1.
Pack needle bearing with suitable grease.
