Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
_fi/Page-2583001.png)
Control Assembly: Service and Repair
Heater Control Replacement
Heater Control Replacement
1. Remove the instrument panel.
2. Remove the radio/cassette player.
3. Disconnect the air mix cable at the heater assembly.
4. Remove the self-tapping screws (4) and setting plate, then disconnect the wire harness connectors and cables. Remove the heater control.
5. Install in the reverse order of removal, reconnect the cables, making sure they are properly adjusted.
