Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
4. If the clearance exceeds the service limit, measure distance (A) on the spacer collar.
Standard: 26.03-26.08 mm (1.025-1.027 in)
5. If distance (A) is less than the standard, replace the spacer collar with a new one.
If distance (A) is within the standard, measure the thickness of 4th gear.
Standard: 31.42-31.47 mm (1.237-1.239 in)
Service Limit: 31.3 mm (1.232 in)
-
If the thickness of 4th gear is less than the service limit, replace 4th gear with a new one.
-
If the thickness of 4th gear is within the service limit, replace the 3rd/4th synchro hub with a new one.
6. Measure the clearance between 5th gear and the spacer collar.
Standard: 0.06-0.21 mm (0.002-0.008 in)
Service Limit: 0.3 mm (0.012 in)
7. If the clearance exceeds the service limit, measure distance (B) on the spacer collar.
Standard: 26.03-26.08 mm (1.025-1.027 in)