acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

SRS - Cable Reel Holding Fixture|Page 6527 > < SRS - Cable Reel Holding Fixture|Page 6525
Page 2
background image

4.Center the cable reel, Do this by first rotating the cable reel clockwise until it stops. Then rotate it counterclockwise (approximately two turns) until:

-

The yellow gear tooth lines up with the alignment mark on the cover.

-

The arrow mark on the cable reel label points straight up. 

5. Install the steering wheel and attach the cable reel 3-P connector to the clip. 

6. Connect the horn connector and cruise control set/resume switch connector. 

7. Install the steering wheel nut.

SRS - Cable Reel Holding Fixture|Page 6527 > < SRS - Cable Reel Holding Fixture|Page 6525