Integra (RS, LS) L4-1834cc 1.8L DOHC PFI (1995)
/l4-1834cc_1.8l_dohc_pfi/Page-3178003.png)
8. Install the driver's airbag assembly.
9. Connect the cable reel 6-P connector to the SRS main harness, then install the knee bolster and dashboard lower cover.
10. Remove and properly store the short connector(s)(RED), then reconnect the airbag connector(s) (and reinstall the glove box).
11. Reconnect the battery positive cable, then the negative cable.
12. After installing the cable reel, confirm proper system operation:
-
Turn the ignition ON (II); the instrument panel SRS indicator light should go on for about six seconds and then go off.
-
Make sure both horn buttons work.
-
Make sure the headlight and wiper switches work.
-
Go for a test drive and make sure the cruise control switches work.
