Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
61. After tightening the rack end, stake the four sections of lock washer with a commercially available roll Din drift and a mallet.
62. Apply steering grease to the circumference of the rack end housing.
63. Coat the rack end groove and inside of the boot with silicone grease.
64. Install the boots in the rack end with the tube clamps.
NOTE: Install the boots with the rack in the straight ahead position (i.e. right and left tie-rods are equal in length).