Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
_mfi/Page-3254012.png)
65. Adjust the air hose fitting position of the boots by turning it as shown below.
66. Connect the air hose between the right and left boot, then install the clips on the cylinder pipe B as shown.
67. Install new boot bands on the boot and bend both sets of locking tabs.
68. Lightly tap on the doubled-over portions to reduce their height.
CAUTION: Stake the band locking tabs firmly.
69. Slide the rack right and left to be certain that the boots are not deformed or twisted.
70. Install the right and left tie-rod ends on the rack ends.
