Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
_mfi/Page-2770004.png)
9. Support the countershaft on a steel block, and install 4th gear using the special tools and a press,
10. Support the countershaft on a steel block, and install 5th gear using the special tools and a press, as shown.
11. Install the needle bearing, then install the ball bearing using the special tools and a press as shown.
12. Securely clamp the countershaft assembly in a bench vise with wood blocks.
