Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
13. Install the spring washer, tighten the locknut, then stake the locknut tab into the groove.
-
LOCKNUT: 108 - 0 - 108 Nm (80 - 0 - 80 ft. lbs.).
13. Install the spring washer, tighten the locknut, then stake the locknut tab into the groove.
-
LOCKNUT: 108 - 0 - 108 Nm (80 - 0 - 80 ft. lbs.).