Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
_mfi/Page-2788003.png)
8. If distance (B) is not within the standard, replace the spacer collar with a new one. If distance (B) is within the standard, measure the thickness of
5th gear.
-
Standard: 31.42 - 31.47 mm (1.237 - 1.239 inch).
-
Service Limit: 31.3 mm (1.232 inch).
-
If the thickness of 5th gear is less than the service limit, replace 5th gear with a new one.
-
If the thickness of 5th gear is within the service limit, replace the 5th synchro hub with a new one.
